QSI 520c Guía de usuario Pagina 15
- Pagina / 87
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
QSI 500 SERIES USER GUIDE
Note: The camera power connecter uses a standard 2.1mm coaxial DC power
connector with center positive. Inside diameter 2.1mm, outside diameter 5.5mm,
length 10mm.
Caution: Because of the wide range of potential power sources (especially with
field operations that can also employ batteries, generators, DC inverters, etc.)
there is the real possibility of damaging your camera and other electrical
equipment by creating unexpected ground loops and different ground reference
potentials between your equipment.
It is highly recommended that the included AC adapter be used to power the
camera at all times. If a power source other than the included AC adapter is used,
it is your responsibly to insure that it is suitable. Avoid sharing the camera DC
power source with other devices that can produce excessive noise (old technology
dew heaters, etc.) and possible ground loops that could interfere with the reliable
operation, or even damage your imaging equipment.
If you choose to use a power source other than the included AC adapter and are
uncertain about meeting these requirements, please contact QSI for assistance.
USB Connector
The camera's USB interface is compatible with USB 2.0 and 1.1. The included USB 2.0
cable plugs into the USB port on the camera connector panel. The other side connects to
any standard USB port on your computer. All camera control commands and resulting
images are passed over the USB cable.
Note:
Do not connect your camera to your computer unless you have
successfully installed the camera software and drivers.
After the camera power-up initialization is complete, and the camera's USB cable is
connected to your computer, the computer will make a Plug-N-Play sound indicating that a
device was connected to the computer. This means that your camera is ready and is
listening for commands to be sent over the USB connection.
Note: QSI 500 Series cameras do not draw power from the USB bus. Powered
hubs are not necessary for operation.
12
- 500 Series User Guide 1
- Table of Contents 2
- Getting Started 4
- What’s In the Box? 5
- Get to Know Your Camera 6
- Install Software and Drivers 7
- Connect the camera 8
- Take an image 10
- QSI 500 SERIES USER GUIDE 11
- Camera Attachment Options 12
- Using SLR Lenses 13
- Electrical Connections 14
- Cooling the Camera 17
- Internal Color Filter Wheel 21
- Advanced Setup Options 22
- Imaging Options 25
- Other Options 25
- Enable Pixel Masking 26
- Status and Notification 28
- CCD Imaging Overview 31
- Interline Transfer CCDs 32
- Anti-Blooming CCDs 32
- Microlenses 33
- Single-shot color CCDs 33
- Signal versus noise 34
- Reducing noise in CCD images 35
- 6-minute Dark Frame 36
- Original image 37
- Flat Fields 37
- Bias Frames 39
- Stacking Images 40
- Color images 41
- Taking Images with your 42
- QSI 500 Series Camera 42
- Camera Control Window 43
- Cool the CCD 45
- Focusing with MaxIm LE 46
- Take a single image 47
- View the image in MaxIm LE 48
- Take a series of images 48
- Image Calibration 50
- Dark Frames 51
- Manual Image Calibration 52
- Scale by Flat Fields 54
- Calibrate Images in MaxIm LE 59
- Combine Frames in MaxIm LE 60
- Combined image of M78 62
- Binning 63
- 384x256 64
- Shutting down your camera 67
- Guiding 68
- Using an AutoGuider 69
- Accessories 74
- SLR lens adapter 75
- Liquid heat exchanger 75
- Recirculating pump 75
- Color filter wheel 75
- Care & Maintenance 76
- Cleaning the color filters 78
- Cleaning the CCD cover glass 78
- Updating the Firmware 78
- Recharging the desiccant 80
- Technical support 81
- C-mount adapter 82
- Model 504 CCD Specifications 83
- Model 516 CCD Specifications 83
- Model 532 CCD Specifications 84
- Model 520 CCD Specifications 84
- Model 540 CCD Specifications 85
- Model 583 CCD Specifications 85
- Appendix B – Warranty 86
Relacionado con productos y manuales para Cámaras De Seguridad QSI 520c
Cámaras De Seguridad QSI 516 Guía de usuario
(89 paginas)
(89 paginas)
Cámaras De Seguridad QSI 520c Guía de usuario
(82 paginas)
(82 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales